Listing last updated:

Yacht Detail


2025 Toy Marine 36' (10.97 m) 36

Porto di Savona, Italy

The Toy 36 stands out for its harmonic design with a classic setting, but is thought over in every curve to be in line with a refined and current aesthetic sensibility.

Tax Not Paid

PDF
Vessel ID# 2832422    Last Updated: 2025-05-19 10:45:27

$ 742,950 USD

650,000 Euros
$ 1,053,894 CAD
£ 556,602 GBP

Description

The Toy 36 stands out for its harmonic design with a classic setting, but is thought over in every curve to be in line with a refined and current aesthetic sensibility. The highest quality materials and components have been chosen to integrate into the overall design while leaving the owner the opportunity to customize technical choices and outfitting details.


Safety and ease of use are the main qualities of the boat, while the deep V-shaped hull ensures course stability even in rough seas.

Propulsion takes place via traditional shaft lines and the motors, positioned under the sundeck, are easily accessible for any inspection and maintenance activity. The large cockpit, a natural continuation of the dinette and the low freeboard gives a pleasant feeling of space and contact with the sea.


The Toy 36 is the typical picnic boat, but it also allows cruises with family or friends.


The layout of the boat has been designed for maximum comfort during navigation.


A large platform makes entry on board and access to the sea particularly convenient.


In the cockpit two large sun loungers are ideal for relaxing even while sailing, while the large dinette is protected by the deckhouse with an electrically opening roof.


The large cockpit is in fact the natural continuation of the dinette and together they compose a unique environment that allows to share pleasant moments on board.


The low freeboard gives a pleasant feeling of space and contact with the sea.


The bow area is equipped with a comfortable sunbathing area.


Below deck, an unpredicted height for a boat of eleven meters allows excellent habitability in all environments. The V-shaped bed in the owner’s cabin has been designed to best optimize space, while the comfortable sofa in the sitting area can be converted into a bed to accommodate guests.


Teak with light maple vanishing points creates a pleasant continuity between the interiors and exteriors.


Aspire Yacht Sales is pleased to assist you in the purchase of this vessel. This boat is centrally listed by Merle Wood & Associates. It is offered as a convenience by this broker/dealer to its clients and is not intended to convey direct representation of a particular vessel

Specifications

LOA: 38' 3'' (11.66 Meters)

Type: Power- New

Year: 2025

Beam: 12' 6''

LOD: 38' 3''

LWL: 32' 8''

Draft Max: 2' 11''

Cabins: 1

Sleeps: 3

Heads: 1

Range NMI: 300

Fuel Type: Diesel

Hull Material: Fiberglass

Hull Finish: Gelcoat

Hull Shape: Deep Vee

Air Conditioning: Yes

Tower: No

Bow Thruster: Yes

Fuel Tank: 264 Gallons (999.35 Liters)

Fresh Water: 35 Gallons (132.49 Liters)

Displacement: 8 tonnes

CE Certified: Yes

Designer: Toy Marine (Italy)

Builder: Toy Marine (Italy)

Photos click to view all

Engines

Engine 1

  • Engine Make: Yanmar
  • Engine Model: 8LV
  • Engine Year: 2025
  • Engine Type: Inboard
  • Drive Type: V
  • Power HP: 320.00
  • Power KW: 238.62
  • Fuel Type: Diesel

Engine 2

  • Engine Make: Yanmar
  • Engine Model: 8LV
  • Engine Year: 2025
  • Engine Type: Inboard
  • Drive Type: V
  • Power HP: 320.00
  • Power KW: 238.62
  • Fuel Type: Diesel

Full Details

MAIN CHARACTERISTICS

Hull length 11,00 mt. 36.0 ft

Length overall 11,65 mt. 38.2 ft

Length at waterline 9,96 mt. 32.7 ft

Beam 3,80 mt. 12.5 ft

Draft (max) 0,90 mt. 2.9 ft

Displacement (half load) 8 tons.

Engines N. 2 YANMAR 320 HP

Transmission N. 2 RR 2.08 LP; V-drive gearboxes

Propulsion shafting In line prop shaft with submerged propellers

Steering system Hydraulic system with blade rudders

Fuel capacity 242 UK gallons (1000 Lt)

Maximum Theoretical Cruising

Autonomy 3000 RPM – 28 Knots = 300 Nautical Miles

Water Capacity 132 UK gallons (500 Lt)

Cruising speed 26 knots

Top speed 30 knots

Design: Nauta Design

Certification CE – B off shore

HULL AND STRUCTURES

  • Vessel built in accordance with CE certification, cat. B offshore
  • Sandwich hullsides and singleskin bottom.
  • GRP swimming platform with teak gratings and folding swimming ladder
  • Hinged transom door.
  • Watertight bulkheads: bow - midship / engine room.
  • Hydraulic trim tabs
  • Antifouling bottom paint and red / white bootlines.
  • Cathodic protection with sacrificial anodes

DECK

  • Deck and superstructure with fly bridge laminated in GRP sandwich with PVCcore.
  • White gelcoat finish with sprayed non-skid.
  • N.2 cockpit sun beds on engine cockpit hatches and on foredeck.
  • N.2 engine room hatches.
  • N.1 systems locker hatch and anchor locker hatch.
  • N. 4 handrails, on roof top and bow deck
  • Stainless steel ladder to the fly bridge with steps made of teak wood.

Teak

  • Cockpit, helm station and dinette sole covered with 10 mm teak and solid sidecoamings.
  • Solid teak sheer line toe rail.

Hatches, portlights and windows

  • Low profile deck hatches.
  • Custom smoke grey plexi windshield.
  • Windshield center section opening with upper hinges.
  • N.2 wipers with freshwater washer. Pump connected to boat freshwater tank.
  • Hatches handles and hinges in stainless steel.

Deck accessories

  • Mooring and steaming light post.
  • Teak Flagpole.
  • Watertight inlet for shore power.
  • Hidden deck shower with hot and cold fresh water.
  • Courtesy foot-lights.
  • Inox Swimming ladder withdrawn in the aft platform

Mooring system

  • Anchor windlass 1000 W with remote switches at helm and forepeak, chain
  • diameter 8mm
  • Stainless Steel Trefoil type anchor Kg 10.
  • Stainless Steel stem plate with mooring fairlead integrated.
  • Galvanized 8 mm steel chain, 50 mt length with swivel.
  • N. 6 flush deck cleats, N. 2 on the bow, N 2 mid ships, N. 2 at stern.
  • N. 8 Pushlock along the toerail toward the CL. for fenders.

DECK FURNITURE

Dinette

  • C shaped lounge with folding CL seat.
  • Drawer below seats
  • Teak covered hi-low table.
  • Hatch with direct access to bilge area
  • Hatch with access to fuel tank inspection

Galley

  • Stainless steel sink with hot-cold mixer faucet.
  • Refrigerator 110 l.
  • Freezer sunk in countertop 50 l.
  • Electric cooktop with two burners.

Steering station

  • Double helm seat to the front of the galley.
  • Helm console with instruments and engine controls and various, 1 Display 9”
  • 3” magnetic compass.
  • Electronic engine controls.
  • Ongaro stainless steel steering wheel.
  • Hydraulic steering pump.

Upholstery and canvas

  • Dinette cushion with Sunbrella washable external cover.
  • External cushions with closed cell rubber foam and with Sunbrella washable external cover.

INTERIOR FURNITURE

Interior material

  • Furniture and bulkheads and hull linings off white lacquered with teak trims or
  • teak/mahogany veneered, door frames bulkhead flush and teak doors.
  • Cabin sole made of marine grade plywood and finished with teak, oak or
  • mahogany veneer.
  • Door handles, and interior fittings in polished stainless steel or satin finish.

Cabins

Twin size bed with “V” layout.

  • - N. 2 hanging locker with drawers.
  • - Drawers and storage under berth.
  • - 220V 60hz outlet.
  • - N. 1 opening deck hatch.

N. 1 sliding sofa / bed.

  • - Cabinets and bookshelf.
  • - Hatch and fixed porthole

Heads

  • Sink with shower mixer & support. storage below and vanity mirror.
  • Shower with teak gratin.
  • Hot-cold lever mixer faucet.
  • Electric toilet.
  • 220 V AC 60hz outlet.
  • Complete set of bathroom accessories.
  • Opening deck hatch.

Upholstery

  • Foam berth mattresses with lining.
  • Bedspreads and cushions made of “ecru” fabric.
  • Clear leather like vinyl ceilings.

ENGINES

  • 2 engines YANMAR 370 hp. 8LV
  • RR 2.08 LP reverse gearboxes.
  • Stainless steel AISI 316 propeller shafts.
  • PSS shaft log seals and bronze stuffing boxes.
  • Bronze struts.
  • Four blades propellers.
  • Inox rudders blades 16/11V

Fuel system

  • 50 mm Stainless steel fuel fills on deck with drain.
  • Structural GRP fuel tank of 242 UK gallons (1000 lt) capacity, with stainless steel
  • inspection and cleaning port including fills, supplying engines and generator.
  • Tank level gauge at steering station.
  • RiNa approved flexible fuel piping.
  • Racor filter for each engine.

Cooling and exhaust system

  • Engine cooling system with heat exchanger.
  • Bronze seacocks with valve.
  • Raw water strainers with removable stainless steel filters.
  • Wet engine exhaust system with submersed exits and by pass for low rpm at stern under swimming platform.
  • 4” Engine Exhaust.

Ventilation and insulation

  • Engines air intakes from deck house sides grids.
  • Engine hatches and engine room acoustically insulated with fireproof and washable material.

AUXILIARY EQUIPMENT

Fresh water system

  • Stainless steel flush fill on deck.
  • N°2 structural GRP 132 UK gallons (250 lt.) each tanks with inspection ports.
  • Water level gauge at steering station.
  • Fresh water pressure pump.
  • 220V AC 60hz, 25 lt boiler.
  • Water distribution system for galley, head and cockpit shower.
  • Cockpit shower with hot and cold water.

Salt water system

  • Raw water pressure pump.
  • Manifold for distribution to WC
  • Anchor locker chain washer.

Grey water system

  • Grey water tank for head sink and shower including 12V drain pump.
  • Galley sink with overboard discharge.

Black water system

  • N. 1 electric toilets.
  • Black water polypropylene tank with electric sump pump and Y valve.
  • Alarm for full tank, valves manifold for dock / overboard discharge.

Bilge system

  • N. 4 12V DC automatic bilge pumps. One in aft peak, one mid ship / engine bay, one for cabin / forepeak.
  • Emergency engine room suction system (LUPE)
  • Bilge pumps have automatic switch floats and manual override switches on helm console.

ELECTRIC SYSTEM

220 V AC 60hz

  • Watertight inlet for shore power 32 Amp.
  • Generator 6.0 KW 220V AC 60HZ.

12 V DC

  • Service batteries set 12V 510 Ah.
  • Engines and genset start batteries set 12V 200 Ah.

Electrical panels

  • Main distribution panel.
  • Batteries switch panel.
  • 2 display 12”.
  • Cockpit control panel.

Equipment

  • 1 12V 80 Ah battery charger.
  • 2 12V 80A engine alternators.
  • 1 Inverter 1000 W

Lighting

  • Watertight led spots in head, dinette and galley.
  • Led spots in accommodation.
  • Bed reading lights.
  • N. 4 watertight cockpit foot lights.
  • C.E. approved navigation lights.

Various

  • Register approved navigation lights. Switches for navigation lights on helm console.
  • Earthing system.
  • Cathodic protection with sacrificial anodes.

INSTRUMENTS

  • N. 1 VHF
  • Integrated Hi-FI music system, 2 dinette speakers and 2 watertight speakers in cockpit.

VARIOUS

  • Firefighting system in engine compartment with emergency control installed at steering station.

Delivery and documents

  • Sea trials.
  • System test.
  • CE / RINA certification (12 people).
  • CE approved owner’s manual.

Listing MLS by Yachtr.com

Contact Us

2612 NE 11 Ct
Fort Lauderdale FL
Email: info@aspireyachtsales.com

At AYS we know that yachting offers a lifestyle that is unlike anything else. It provides the finest experience of being at sea that one can achieve. It is the mission of John Booysen and everyone at Aspire to ensure that you fall in love with yachting and that your time spent enjoying your yacht and the incredible experiences you’ll share onboard are maximized to their fullest potential.


Yacht Detail pages on Aspire Yacht Sales provide complete specifications for every vessel in our inventory — dimensions, equipment lists, engine hours, photo galleries, and direct broker contact. Each yacht detail listing pulls live IYBA data plus Aspire’s broker notes on condition and recent maintenance.

Yacht For Sale — Complete Vessel Details

Each yacht for sale at Aspire Yacht Sales includes complete specifications, dimensions, equipment lists, engine hours, photo galleries, and direct broker contact. Whether you are looking at a 60-foot express cruiser or a 130-foot motor yacht for sale, this detail page provides everything needed to evaluate the vessel before requesting a viewing or sea trial.

What Yacht For Sale Detail Pages Include

Every yacht for sale listing on Aspire pulls live IYBA cooperative MLS data plus our broker’s direct notes. You will see hull material, propulsion type, beam, draft, fuel and water capacity, electronics package, watermaker presence, generator hours, recent survey notes when available, and seller notes on the reason for sale. Aspire’s broker also adds market context: how this yacht for sale compares to comparable listings and what we believe is the realistic price range.

Inspecting Any Yacht For Sale

When you find a yacht for sale of interest, the standard inspection sequence is: schedule an in-person viewing at the home marina, request additional photos or video of specific systems, schedule a sea trial under load (typically 4-6 hours running plus engine inspection), and commission a pre-purchase marine survey by a credentialed surveyor. Aspire coordinates each step. The full inspection cycle for a yacht for sale typically runs 2-4 weeks before final closing.

Yacht For Sale Across South Florida and Beyond

Aspire represents yacht for sale listings across Fort Lauderdale, Miami, Palm Beach, Jupiter, Cape Coral, and Puerto Rico. We also list and broker yacht for sale opportunities in the Bahamas, the Caribbean, the Northeast US, the Pacific Northwest, and the Mediterranean. Each yacht for sale includes home port information so you can plan inspection logistics.

Buying This Yacht For Sale Through Aspire

There is no additional cost to use Aspire as your buyer’s broker on this yacht for sale — commission is paid by the seller. We negotiate purchase price and terms, coordinate marine survey and sea trial scheduling, manage escrow, handle USCG documentation, and oversee closing. For international yacht for sale transactions, we coordinate offshore registration, VAT/import duty considerations, and transatlantic delivery. Contact Aspire to begin the inquiry on this specific yacht for sale. Aspire is a member of the International Yacht Brokers Association.

Interested?

Contact an Aspire Yacht Sales professional
to learn more about this yacht.

Download The Buyer's Guide

Our Story & Philosophy

Aspire Yacht Sales, we believe that true success in yachting comes from relationships built on trust, honesty, and care. We’ve had the privilege of guiding clients and their families through every stage of yacht ownership, from the excitement of a first purchase to the intricacies of custom builds, refits, and selling their yacht. Our goal is simple: to create partnerships that last well beyond the sale, representing you with integrity and doing what we say we’re going to do.

We work side by side with a trusted network of industry professionals, including naval architects, shipyards, refit specialists, documentation agents, surveyors, maritime and maritime attorneys. To ensure your experience is smooth, secure, and enjoyable from start to finish.

Whether you’re considering a new build, upgrading to your next yacht, or preparing to sell, Aspire Yacht Sales combines hands-on expertise, market insight, and global connections to bring your vision to life.

Yachting is more than ownership; it’s a lifestyle filled with memories, freedom, and discovery. From tranquil weekends at anchor to journeys that span the world, Aspire Yacht Sales is here to help you make every moment on the water truly unforgettable. Partner with us today, and let’s turn your yachting dreams into reality.

Download The Seller's Guide