Yacht Detail
2006 Beneteau 37' (11.28 m)
Lewisville, Texas, United States
Absolutely Beautiful Freshwater Beneteau 373. Well Equipped and Ready to Go!!!
- Cruisers
- Sail
- Used
- Diesel
- Fiberglass Hull
- HIN/IMO: BEYN5128H506
| FEATURES: |
|---|
| Freshwater Boat |
| In-Mast Furling Mainsail |
| Standard Draft |
| Well Equipped |
| Well Maintained |
| Notable Upgrades: |
Description
Designed to combine elegance, performance and spacious accommodation, the Oceanis Clipper 373 has a new two-level deck layout, which gives it sleeker lines and makes moving around and handling easier. An efficient hull, a balanced rig and a standard deep keel designed by Berret-Racoupeau ensure stability at sea and greater tacking capability.
Aspire Yacht Sales is pleased to assist you in the purchase of this vessel. This boat is centrally listed by Little Yacht Sales. It is offered as a convenience by this broker/dealer to its clients and is not intended to convey direct representation of a particular vessel
Specifications
HIN/IMO: BEYN5128H506
LOA: 37' 0'' (11.28 Meters)
Type: Sail- Used
Year: 2006
Beam: 12' 4''
LWL: 32' 10''
Draft Max: 6' 1''
Cabins: 2
Sleeps: 7
Single Berths: 1
V Berths: 1
Double Berths: 1
Queen Berths: 1
Heads: 1
Fuel Type: Diesel
Hull Material: Fiberglass
Air Conditioning: Yes
Tower: No
Bridge Clearance: 51'
Fuel Tank: 33 Gallons (124.92 Liters)
Fresh Water: 99 Gallons (374.76 Liters)
Holding Tank: 22 Gallons (83.28 Liters)
Displacement: 14617 lbs
Dry Weight: 14617
Builder: Beneteau
Photos click to view all
Engines
Engine 1
- Engine Make: Yanmar
- Engine Year: 2006
- Engine Type: Inboard
- Drive Type: Direct
- Power HP: 29.00
- Power KW: 21.63
- Fuel Type: Diesel
- Engine Location: Middle
Full Details
Features
Electrical Equipment
Shore Power Inlet:
✓
Inverter:
✓
Electronics
Depthsounder:
✓
Log-Speedometer:
✓
Wind Speed and Direction:
✓
TV Set:
✓
Plotter:
✓
Autopilot:
✓
Radio:
✓
Compass:
✓
CD Player:
✓
GPS:
✓
Cockpit Speakers:
✓
VHF:
✓
Flat Screen TV:
✓
Inside Equipment
Electric Bilge Pump:
✓
Oven:
✓
Manual Bilge Pump:
✓
Microwave Oven:
✓
Marine Head:
✓
Air Conditioning:
✓
Heating:
✓
Hot Water:
✓
Refrigerator:
✓
Deep Freezer:
✓
Battery Charger:
✓
Outside Equipment
Cockpit Shower:
✓
Cockpit Cushions:
✓
Swimming Ladder:
✓
Rigging
Steering Wheel:
✓
Sails
Furling Mainsail:
✓
Furling Genoa:
✓
Cockpit
- Pivoting helm seat allows easy access to bathing platform. (Bénéteau patent).
- 2 side cockpit lockers fitted with wood shelves (for liferaft stowage).
- 2 aft cockpit lockers.
- 1 separate, watertight gas locker.
- 2 teak-slatted helm benches at each side of cockpit.
- All cockpit benches are teak-slatted.
- Stainless steel leather trimmed steering wheel.
- A steering wheel console takes navigation instruments. (The instruments are an option.)
- Steering compass on console.
- Control lever to starboard cockpit coaming.
- 12V cigarette lighter socket on console.
- Handrail.
- Cup holder.
- Folding varnished wood cockpit table fixed to steering console.
- Manual bilge pump.
Interior
- FORECABIN -
- Headroom: 1.98 m.
- Triangular double berth (2.00 m x 1.45 m x 0.80 m.)
- One 120 V socket.
- Openings and lighting:
- Shelving along the hull.
- Locker with door to port.
- Hanging locker to starboard.
- Plenty of light:
- T40 opening deck hatch with blind.
- Two fixed hull ports (one to each side of the hull).
- Deckhead light with independent switch.
- Two adjustable reading lights.
- SALOON -
- A handrail surrounds the saloon for easier movement.
- Headroom: 2.00 m.
- Saloon with two lengthwise settees:
- Port settee: 2.00 m x 0.52 m.
- Starboard settee: 1.80 m x 0.52 m.
- Settee backrests are sloping for more comfort.
- A central inlaid wood table with bottle holder and folding leaves, surrounded by a moulded wood fiddle, is fixed to the mast support pillar.
- Stowage:
- Shelved stowage with stainless steel retaining bar.
- Stowage unit with door along the hull port and starboard.
- Stowage under port settee.
- Inner hull lining in plain plywood.
- Openings and lighting:
- Two Lewmar T20 opening hatches with blinds.
- Two Lewmar T4 fixed ports with curtains.
- Large panoramic window (1.60 m x 0.40 m) at deck level with rigid blinds.
- Two fixed hull ports (1 on each side).
- Three halogen deckhead lights with independent switches.
- Two bright wall lights on bulkhead.
Galley
Electrical panel:
- 12 switch 12 V electrical panel plus 3 x 120 V switches.
- Cigarette lighter socket.
- Double protection to electrical panel, differential circuit breaker and bi-polar temperature magneto for 120 V circuit and 12 V magneto temperature circuit breaker.
Supply:
- The 12 V electrical circuit is supplied by:
- One 110 Amp service battery.
- One 70 Amp engine battery.
Resource management indicators:
- Voltmeter.
- Battery charge warning light.
Battery charging:
- Battery charging by engine alternator or 120 V 20 Amp shore supply.
Lights:
- Bow and stern navigation lights.
- Steaming light (masthead light).
- Anchor light.
Electrical
Electrical panel:
- 12 switch 12 V electrical panel plus 3 x 120 V switches.
- Cigarette lighter socket.
- Double protection to electrical panel, differential circuit breaker and bi-polar temperature magneto for 120 V circuit and 12 V magneto temperature circuit breaker.
Supply:
- The 12 V electrical circuit is supplied by:
- One 110 Amp service battery.
- One 70 Amp engine battery.
Resource management indicators:
- Voltmeter.
- Battery charge warning light.
Battery charging:
- Battery charging by engine alternator or 120 V 20 Amp shore supply.
Lights:
- Bow and stern navigation lights.
- Steaming light (masthead light).
- Anchor light.
Sail Area
I : 44.72 ft
J : 13.91 ft
P : 41.01 ft
E : 14.44 ft
Working Sail Area : 716.02 sq ft
Propulsion
- Engine compartment with foam sound-proofing.
- Engine control panel with rev counter and alarms to starboard cockpit coaming.
- Propeller shaft with GRP protection moulded into the hull.
- Fixed three-blade propeller.
- Engine mounting built into the inner mould.
- Rotomoulded 125 L diesel tank aft, fitted with electronic gauge.
- Saltwater and diesel filters with sediment reservoirs.
Hull Construction
- The hull is single-skinned GRP construction.
- Reinforced points (keel, rudder, chain plates, hull-deck joint) help to strengthen the structure.
- A structural inner moulding is bonded and laminated to the hull. Its structural role is important as it takes and absorbs the stresses at pressure points (shroud chainplate tie rods, keel, rudder, etc.), and spreads any loads guaranteeing reduced strain on the hull.
- The surface material of the inner moulding makes cleaning easier and provides a better finish.
- The standard hull is white in colour with blue and silver livery. Steel blue is available as an option.
Deck Construction
- The deck is sandwich construction (glass fibre and balsa) for an optimal strength/weight ratio and excellent thermal and sound insulation.
- A diamond point non-slip surface increases safety over all areas of movement on deck.
Disclaimer
The company offers the details of this vessel in good faith but cannot guarantee or warrant the accuracy of this information nor warrant the condition of the vessel. A buyer should instruct his agents, or his surveyors, to investigate such details as the buyer desires validated. This vessel is offered subject to prior sale, price change or withdrawal without notice.
Listing MLS by Yachtr.com
Contact Us
2612 NE 11 Ct
Fort Lauderdale FL
Email: info@aspireyachtsales.com
At AYS we know that yachting offers a lifestyle that is unlike anything else. It provides the finest experience of being at sea that one can achieve. It is the mission of John Booysen and everyone at Aspire to ensure that you fall in love with yachting and that your time spent enjoying your yacht and the incredible experiences you’ll share onboard are maximized to their fullest potential.
Yacht Detail pages on Aspire Yacht Sales provide complete specifications for every vessel in our inventory — dimensions, equipment lists, engine hours, photo galleries, and direct broker contact. Each yacht detail listing pulls live IYBA data plus Aspire’s broker notes on condition and recent maintenance.
Yacht For Sale — Complete Vessel Details
Each yacht for sale at Aspire Yacht Sales includes complete specifications, dimensions, equipment lists, engine hours, photo galleries, and direct broker contact. Whether you are looking at a 60-foot express cruiser or a 130-foot motor yacht for sale, this detail page provides everything needed to evaluate the vessel before requesting a viewing or sea trial.
What Yacht For Sale Detail Pages Include
Every yacht for sale listing on Aspire pulls live IYBA cooperative MLS data plus our broker’s direct notes. You will see hull material, propulsion type, beam, draft, fuel and water capacity, electronics package, watermaker presence, generator hours, recent survey notes when available, and seller notes on the reason for sale. Aspire’s broker also adds market context: how this yacht for sale compares to comparable listings and what we believe is the realistic price range.
Inspecting Any Yacht For Sale
When you find a yacht for sale of interest, the standard inspection sequence is: schedule an in-person viewing at the home marina, request additional photos or video of specific systems, schedule a sea trial under load (typically 4-6 hours running plus engine inspection), and commission a pre-purchase marine survey by a credentialed surveyor. Aspire coordinates each step. The full inspection cycle for a yacht for sale typically runs 2-4 weeks before final closing.
Yacht For Sale Across South Florida and Beyond
Aspire represents yacht for sale listings across Fort Lauderdale, Miami, Palm Beach, Jupiter, Cape Coral, and Puerto Rico. We also list and broker yacht for sale opportunities in the Bahamas, the Caribbean, the Northeast US, the Pacific Northwest, and the Mediterranean. Each yacht for sale includes home port information so you can plan inspection logistics.
Buying This Yacht For Sale Through Aspire
There is no additional cost to use Aspire as your buyer’s broker on this yacht for sale — commission is paid by the seller. We negotiate purchase price and terms, coordinate marine survey and sea trial scheduling, manage escrow, handle USCG documentation, and oversee closing. For international yacht for sale transactions, we coordinate offshore registration, VAT/import duty considerations, and transatlantic delivery. Contact Aspire to begin the inquiry on this specific yacht for sale. Aspire is a member of the International Yacht Brokers Association.